Fenix PD32 (including rechargeable battery & charger)

A high intensity LED flashlight in a very small sized body:

The Fenix PD32 weighs a mere 100g (3.5oz) with 18650 battery and measure only 127mm (5")in length for 25.4mm (1")in diameter.

Despite its small size the PD32 will deliver up to 315 Lumens of high intensity light in a perfect mix of focus and flood beam.

The beam shape is perfect when exploring unfamiliar surroundings, projecting a powerful light beam up to 141m (154yrds) while still brightening up your immediate surroundings. 

Economical to run:

The PD32 has been cleverly design to accept two types of batteries: 
- 2x High-capacity CR123A non-rechargeable Lithium batteries 
or 
- 1 x 18650 Li-ion rechargeable battery

The 18650 rechargeable battery makes the PD32 economical to run for heavy users. 

Accepting CR123A batteries also means you can take your PD32 with you on long trekking trips where you don't have the facility to recharge batteries. 
Get as much as 200hrs of use in the Low power mode (9 Lumens) and up to 2hrs of intense light in turbo mode (315lumens). 
The PD32 will also run for up to 8hrs in the high mode giving you a strong 130 Lumen light source. 

Smart power and mode switches make the PD32 a very easy to operate LED torch:

The PD32 comes with a tail cap switch for easy on/off/momentary operation.  The power levels, SOS and Strobe modes are managed from a separate barrel mounted switch making the PD32 very practical to operate as you do not need to toggle between modes everytime you turn on and off the torch via the tail cap switch.

Engineered to endure the toughest of environments:

The PD32 is built with a very high quality LED chip from CREE. The CREE XP-G (R5) has a rated 50,000hrs life span and Fenix strictly follows the LED  manufacturer's design guidelines in order to ensure you never have to worry about light failure.

Along with state of art electronic design, the PD32's body is carved from aircraft-grade aluminium with a Type III hard-anodized anti-abrasive finish making  your PD32 wear and corrosion resitant for years to come.

The PD32 is waterproof rated to IPX-8.  This means that it will operate under any rain condition and can even be dropped into water without damage down to  6.5ft (2m).

Technical details:

All Fenix products are tested in line with ANSI Standard for consistency and comparable results.

LED chip: Cree XP-G LED (R5)

Light intensity: 315 Lumens -> Turbo mode | 130 Lumens -> High mode | 70 Lumens -> Mid mode | 9 Lumens -> Low mode 

Beam distance: Max 141 meters

Beam intensity: 5000cd

Beam shape: Balanced flood beam and focus beam.

Runtime: 200 hrs -> Low mode | 16 hrs -> Mid mode | 8 hrs -> High mode | 2 hrs -> Turbo mode

Light modes: Constant on | Momentary on | Strobe | SOS

Electronic control: Digitally regulated output - maintains constant brightness

Size: 127mm (length) x 25.4mm (diameter) | 5" (length) x 1" (diameter)

Weight: 100g (including batteries) | 3.5 oz

Battery type: 1 x 1850 Li-ion rechargeable battery (included) or 2 x CR123A (Lithium) batteries

Environmental: Waterproof to IPX-8 | Impact resistant 1.5m 

Body type: Aircraft-grade Aluminium with anti-slip knurling and Durable Type III hard-anodized, anti-abrasive finish | Anti-roll design | Removable Steel body clip

Lens: Ultra-clear glass lens with anti-reflective coating

Accessory pack: Holster, lanyard, body clip, two separate O-rings, rubber switch boot (included)

Compatible with Fenix AF02 bike mount

Warranty: 2 years